ул за язык? what on earth possessed you to say that?
draw pull — сила тяги на крюке, тяговое усилие
to pull foot — бежать со всех ног, дать тягу
I think we can pull the boy round this time — я думаю, что на этот раз нам удастся спасти мальчика
to have a pull at the bottle — приложиться к бутылке; глотнуть, выпить
he has no political pull — у него нет связей в правительственных привлекательность, броскость
to pull the door open — потянуть к себе дверь, чтобы открыть её
to pull off — стаскивать, снимать; срывать
to pull at a bottle — приложиться к бутылке, глотнуть из бутылки
to pull stroke — задавать такт при гребле, быть загребным
to get pulled — попасть под арест; угодить в тюрьму
to pull a rock — сделать промах, допустить оплошность
travel trailer — трейлер, туристский автоприцеп
aircraft in the barrier — самолёт, задержанный аварийной (аэродромной) тормозной установкой
aircraft off the line — новый [только что построенный] ЛА
B through F aircraft — самолёты модификаций B, C, D, E и F
carrier(-based, -borne) aircraft — палубный ЛА; авианосная авиация
conventional takeoff and landing aircraft — самолёт с обычными взлетом и посадкой (в отличие от укороченного или вертикального)
keep the aircraft (headed) straight — выдерживать направление полёта ЛА (при выполнении маневра); сохранять прямолинейный полет ЛА
keep the aircraft stalled — сохранять режим срыва [сваливания] самолёта, оставлять самолёт в режиме срыва [сваливания]
nearly wing borne aircraft — верт. ЛА в конце режима перехода к горизонтальному полёту
put the aircraft nose-up — переводить [вводить] ЛА на кабрирование [в режим кабрирования]
put the aircraft through its paces — определять предельные возможности ЛА, «выжимать все из ЛА»
rocket(-powered, -propelled) aircraft — ракетный ЛА, ЛА с ракетным двигателем
roll the aircraft into a bank — вводить ЛА в крен, накренять ЛА
rotate the aircraft into the climb — увеличивать угол тангажа ЛА для перехода к набору высоты, переводить ЛА в набор высоты
single vertical tail aircraft — ЛА с одинарным [центральным] вертикальным оперением
strategic(-mission, -purpose) aircraft — ЛА стратегического назначения; стратегический самолёт
trim the aircraft to fly hands-and-feet off — балансировать самолёт для полёта с брошенным управлением [с брошенными ручкой и педалями]
turbofan(-engined, -powered) aircraft — ЛА с турбовентиляторными двигателями, ЛА с ТРДД
turbojet(-powered, -propelled) aircraft — ЛА с ТРД
water(-based, takeoff and landing) aircraft — гидросамолёт
лодку в воду drag a boat into the water;
что-л. за собой drag smth. along;
2. разг. (нести что-л. тяжёлое) haul (smth.) about;
lug (smth.) about;
3. (тянуть за собой) haul (smth.), tow (smth.) ;
буксир тащит баржу the tug is towing the barge;
кого-л. за руку pull smb. along by the arm;
ведро из колодца pull a bucket out of a well, pull up the bucket;
5. разг. (красть) steal* (smth.), lift (smth.) ;
8. разг. (идти, ехать куда-л. без охоты) traipse, make* a journey, trek.
ascending chain condition — условие обрыва возрастающих цепей, условие максимальности
descending chain condition — <math.> условие минимальности, условие обрыва убывающей цепочки
См. также в других словарях:
haul — [n] something obtained or moved booty, burden, cargo, catch, find, freight, gain, harvest, lading, load, loot*, payload*, spoils, takings*, yield; concepts 337,338 haul [v] move, pull to another spot back, boost, bring, buck, carry, cart, convey … New thesaurus
haul — vb hale, *pull, draw, drag, tug, tow Analogous words: *move, remove, shift: *lift, raise, hoist, heave, boost, elevate: convey, transport, *carry … New Dictionary of Synonyms
tow — vb tug, haul, hale, *pull, draw, drag … New Dictionary of Synonyms
tow — [v] pull along drag, draw, ferry, haul, lug, propel, push, trail, trawl, tug, yank; concept 206 Ant. push … New thesaurus
haul — Synonyms and related words: attraction, bag, barge, blackmail, board, boat, boodle, boom, boost, booty, bring to, burden, bus, capture, cargo, carry, cart, cast loose, catch, clap on ratlines, clear hawse, coach, convey, cut loose, draft, drag,… … Moby Thesaurus
tow — I (New American Roget s College Thesaurus) v. t. draw, pull, drag, haul; take in tow. See traction. II (Roget s IV) v. Syn. haul, pull, drag, ferry, lug, yank, tug; see also draw 1 . See Synonym Study at pull . III (Roget s 3 Superthesaurus) v.… … English dictionary for students
haul — I (New American Roget s College Thesaurus) v. drag, pull, draw; transport, deliver; lug; haul up, arraign. See transportation, traction, lawsuit. II (Roget s IV) n. 1. [A pull] Syn. tug, lift, wrench; see pull 1 . 2. [The distance something is… … English dictionary for students
haul — 01. We had to get a tow truck to [haul] our car out of the ditch. 02. They had to pay $50 to have all the old wood and bricks [hauled] to the dump. 03. The teenager was [hauled] into the office for swearing at his teacher. 04. The juvenile… … Grammatical examples in English
tow — tow1 towable, adj. towability, n. /toh/, v.t. 1. to pull or haul (a car, barge, trailer, etc.) by a rope, chain, or other device: The car was towed to the service station. n. 2. an act or instance of towing. 3. something being towed … Universalium
tow — I. verb Etymology: Middle English, from Old English togian; akin to Old English tēon to draw, pull, Old High German ziohan to draw, pull, Latin ducere to draw, lead Date: before 12th century transitive verb to draw or pull along behind ; haul … New Collegiate Dictionary
tow — I [[t]toʊ[/t]] v. t. 1) cvb to pull or haul (a car, barge, trailer, etc.) by a rope, chain, or other device 2) an act or instance of towing 3) something being towed 4) cvb something, as a boat or truck, that tows 5) cvb a rope, chain, metal bar,… … From formal English to slang
The Haul/tow Mode In The Vehicle Updated 04/2023
An huge container is achievable because of numerous technological factors. The presence of the haul/tow mode in the vehicle is an important consideration. In order to make it easier to tow the trailer, this button regulates engine power. It is common for the trailers to be heavy and big. Vehicles must have remarkable pulling power to move the cargo….
1. How to Use Tow/Haul Button
Autonomous vehicles have a tow/haul button that helps with power control when towing a big load. The button can be found near the gearshift levers on the dashboard. It is within the driver’s reach, and it enhances the stability of large automated cars.
Heavy-duty engines are standard on hauling vehicles. The button aids driver control of the vehicle. Use this button to boost performance and ensure that the engine power does not exceed its limits owing to a high power demand on the truck’s engine
All cars benefit from the use of the tow/button. It’s possible that you’ll be given explicit instructions on when to click the button in some situations. Every time you’re hauling a weight, several car models encourage employing this mode.
It’s not uncommon for truck manufacturers to advise drivers to use the button only when they reach a weight threshold where the engine needs more power. A manual is provided by the manufacturers of these vehicles to explain how and when to utilize the haul feature.
The towing/hauling features necessitate thorough comprehension. Ask for specifics if you need them. More familiarity with the function will allow you to better utilize the button’s capabilities and safely control it.
2. Functions of the Tow/Haul Button
When you press the tow/haul button, your vehicle shifts into low gear, giving you better control and stability. Despite the fact that this button has additional technological functions, it accomplishes it in just a few words.
Autonomous vehicles such as trucks, pickups, and SUVs are equipped with the button. Manual models do not have this feature. When you want to turn it on, all you have to do is push the power button once. A green light indicates that the button is in function mode. The sun also goes out when the switch is turned off.
Stability is improved while using the tow/haul button in a Ram 1500. When the driver has more control over brakes, the truck is more stable as well. In a Toyota Tundra, it works the same way.
Transmission downshifting occurs when traveling down a hill. For those times when you don’t want to have to slam on the brakes, the haul button can aid. To avoid mechanical failure or the need for a new spare part, the switch is installed.
3. How to Operate the Tow/Haul Button
Once you’ve finished loading your truck, simply click the button to activate the towing mode on your car. If you’re driving up a hill, you’ll notice the difference. You have full control over the truck’s brakes, and the vehicle is stable.
The tow/haul button is good for the truck since it reduces the amount of power you use, which reduces the amount of fuel you consume. A vehicle’s mechanical parts are spared wear and tear because it does not have to work as hard.
When you click the button, the vehicle’s shifting functions alter automatically based on the terrain you’re traveling through. As you go up and down slopes with a big load, you don’t have to constantly change gears like with a manual truck. To preserve the engine from overheating, the car’s automatic processes ensure that the vehicle remains steady even on a bumpy route.
The tow/haul mode on the 2019 RAM 1500 has better performance without taxing the engine. However, there have been reports of overheating and mechanical failure from some customers.
4. Critical Operations of the Tow Mode
i). Control of the Vehicle
When the tow/haul mode is activated, the truck is able to slow down quite quickly thanks to the button. The truck has a smooth downhill drive. The truck’s control can be improved by pressing the tow/haul button. Downhill, the driver doesn’t have to worry about crashing.
ii). Boosting Engine Power
The tow/haul button’s most notable feature is its ability to boost the engine’s power. The truck’s engine is not taxed when towing a big load. In terms of load weight and fuel economy, every model has its own unique set of specs.
iii). Additional Features
Towing and hauling heavy loads is made easier with the tow/haul buttons and other features. With other heavy-duty applications, it might serve as an extra power source.
5. When to Use Tow/Haul Button
The tow/haul button is utilized every time you are pulling a big weight, depending on the manufacturer’s specifications. When you’re in a position where standard driving mode is the best option, you may want to turn it off.
According to the road conditions and other variables affecting control, it may or may not be possible. The weight of the load must also be taken into account. There’s no need to utilize the haul button if it won’t impair the truck’s performance. Using the tow/haul option, for example, is unnecessary if you are transporting empty packages.
The towing/hauling mode is useful in rugged and hilly terrains. As a result, even when driving in urban areas with smooth roads, you should click the button to start. There is a lot of traffic in the cities. Avoiding collisions may necessitate quick stops and tighter control of your car.
6. Essential Tips for Using Tow/Haul Button
a. Highway Driving
On the highway, you can get by quite well with the recommended speed without resorting to the haul button. However, when traveling on the highway, maintain your attention on the road and employ other heavy-load hauling applications.
b. Empty Trailer
When you have a light load, don’t use the button because you won’t save any fuel or engine power. When a vehicle is overburdened and requires more power, the makers recommend that the tow button be used. It’s a bad idea to play about with the tow mode.
c. Overweight Trucks
Using the tow/haul mode instead of the necessary equipment will help you meet the requirements for transporting heavy loads. When your vehicle is properly loaded, the button makes it possible to drive safely.
e. Excellent Driving Skills
It’s excellent if you can also learn how to drive a vehicle that can tow a trailer. The tow/haul button is a vehicle control feature that must be utilized by a driver that is qualified to pull large trailers in order to be effective.
f. Activate the Button Depending on the Nature of Road Surface
Make a mental note of any road construction or detour signs that lead you onto rougher terrain as you drive. Tow/haul is required on congested roads with additional traffic control signals and numerous pauses.
The tow/haul button enhances the truck’s braking system. When parking a loaded car on a steep slope, make sure the switch is turned on to increase the stopping strength of the brakes.
But if you pay attention to simple things like checking the parking height, driving carefully, and avoiding rapid braking, you’ll have a better day. Stopping early is possible, especially if it is expected.
7. How the Tow/Haul Mode Enhances Safety
Towing a trailer necessitates that you be aware that your car occupies additional space on the road. You can have a ‘wide load sticker’ on the front and back of your truck, but the first step to safety is to control it. Using the tow/haul mode is as simple as pressing one button.
The truck’s shifting characteristics are altered in the Tow/Haul mode, allowing drivers to put the vehicle in park. The vehicle’s brakes are slowed down if the driver is traveling downhill, allowing for an early stop.
Engine overheating and mechanical failure can be prevented by using the tow mode. Improved control of automobiles on dangerous road routes reduces the number of accidents.
The towing/hauling mode stabilizes the car. There can be no swaying or jerking of the trailer when it is being driven. The truck driver protects other road users by driving in this mode.
When you need to control the truck even when the trailer is not attached, you may need to use the tow/haul mode. For your own protection, you may want to make use of the button. When driving in an area where there are a lot of cars, you want to be sure the brakes are working properly. Tow/haul mode is one of the finest ways to ensure driver safety while on the road.
What is tow haul mode?
Tow haul mode is a feature on many newer model trucks and SUV’s that helps the driver when towing a trailer. When engaged, it adjusts the transmission shift points to keep the engine in a lower gear longer. This prevents the engine from revving too high and allows the vehicle to better use its torque to get up hills or maintain speed on the highway. It also adjusts the throttle sensitivity, so the engine does not lug when going up hills. Finally, it will engage the trailer brakes sooner when coming to a stop.
Since using tow haul mode will put more strain on the engine and transmission, it is not recommended to use it all the time. Only use it when towing a trailer or hauling a heavy load.
What does tow haul mode do?
Tow haul mode is a feature found on some modern automatic transmissions that can be activated by the driver. When engaged, it alters the transmission’s shift points and alters the torque converter’s lockup schedule. The result is that the transmission will hold lower gears longer when towing or hauling a heavy load, and the engine will remain in its peak powerband for better acceleration. Additionally, tow haul mode can help prevent transmission overheating by keeping the transmission in a lower gear when going down long, steep grades.
So, what exactly does all of this do for towing and hauling? For one, it helps increase traction by keeping the engine in its peak power band. It also helps prevent the transmission from overheating, which is a common issue when towing or hauling a heavy load. Additionally, it can help improve fuel economy by keeping the engine in a lower gear when going down long, steep grades. All of these factors combined can make towing and hauling a heavy load much easier and more efficient.
Whether you’re towing a trailer or hauling a heavy load, be sure to activate tow haul mode on your automatic transmission for the best results.
What are the benefits of tow haul mode?
There are many benefits to using tow haul mode, especially when towing a heavy load. When towing a heavy load, tow haul mode helps to automatically adjust the transmission shifts, preventing the transmission from shifting into a lower gear and overworking the engine. This can help to avoid potential damage to the engine and transmission, and can also help to improve fuel economy. In addition, tow haul mode can help to keep the vehicle from overheating, by providing additional cooling when needed.
How do I use tow haul mode?
Most trucks and SUVs nowadays come with a tow haul mode. This is a great feature to have when towing a heavy load or hauling a trailer. Here are some tips on how to use tow haul mode:
When to Use Tow Haul Mode:
Tow haul mode is designed for towing or hauling a heavy load. It can be used when towing a trailer, hauling a heavy load in the bed of your truck, or even when driving in hilly or mountainous terrain. Basically, any time you are putting a heavy load on your vehicle, you can use tow haul mode to help your vehicle handle the load better.
How to Use Tow Haul Mode:
Using tow haul mode is pretty straightforward. Most trucks and SUVs have a button or switch that you can press to activate tow haul mode. Once it is activated, your vehicle will automatically make some adjustments to help it handle the heavy load better. These adjustments can include things like increasing engine power, increasing transmission shifting, and increasing braking power.
Some Things to Keep in Mind when Using Tow Haul Mode:
There are a few things you should keep in mind when using tow haul mode. First, tow haul mode will use more fuel than normal driving, so be prepared to fill up your tank more often. Second, tow haul mode can put extra wear and tear on your vehicle, so be sure to have it serviced regularly. Lastly, be sure to drive safely and carefully when using tow haul mode, as a heavy load can makes things more challenging.
Overall, tow haul mode is a great feature to have if you do a lot of towing or hauling. It can help your vehicle handle the heavy load better and make your drive more comfortable. Just be sure to keep in mind the things we mentioned above and you will be good to go!
What should I do if my vehicle does not have tow haul mode?
If your vehicle does not have a tow haul mode, there are a few things you can do to ensure that your vehicle is able to tow your load properly. First, you will want to make sure that your vehicle is properly equipped for towing. This means that you will need to have a tow bar or a trailer hitch, as well as proper brakes and lights. You will also want to make sure that your vehicle is properly weighted and balanced for towing. This can be done by consulting your owner’s manual or a professional weigh station.
Once you have made sure that your vehicle is properly equipped and weighted for towing, you will need to take some additional steps to ensure that your vehicle can tow your load safely. First, you will want to drive slower than you normally would. This is especially important when driving on highways or in other areas with high speed limits. You will also want to avoid sudden stops or starts, as this can cause your load to shift unexpectedly. Finally, you will want to be extra cautious when making turns, as the added weight of your load can make your vehicle more difficult to maneuver.
By following these tips, you can help ensure that your vehicle will be able to tow your load safely and without incident.
What is the difference between tow haul mode and regular mode?
In general, tow haul mode is used when towing or hauling a load, while regular mode can be used most of the time. There are several differences between the two modes, which are detailed below.
Tow haul mode is designed to make towing or hauling easier and more comfortable. It changes the shift points of the transmission to keep the engine in its power band, and also activates a higher fan speed to keep the engine cool. In addition, tow haul mode typically raises the vehicle’s ride height to improve stability and prevent sag.
Regular mode, on the other hand, is designed for more typical driving conditions. It uses lower shift points to improve fuel economy, and the fan speed is not increased. Ride height is also typically not as high in regular mode, which can improve the vehicle’s handling.
So, in general, tow haul mode is used for towing or hauling, while regular mode is better for more typical driving conditions. There are a few other notable differences between the two modes as well, which are detailed above.
Can I use tow haul mode while towing a trailer?
The short answer is yes, you can use tow haul mode while towing a trailer. This feature is designed for towing and hauling heavy loads, and can help improve performance and fuel economy.
However, there are a few things to keep in mind when using tow haul mode while towing a trailer. First, you’ll want to make sure that your trailer is properly equipped with the necessary lighting and brake systems. Secondly, you’ll want to be mindful of the weight of your trailer and how it may affect the performance of your vehicle.
Generally speaking, tow haul mode can be a great asset when towing a trailer. It can help improve performance and fuel economy, and can make towing a heavy load easier on your vehicle. Just be sure to take the necessary precautions and be aware of the potential effects on your vehicle before using this feature.
What are some tips for using tow haul mode?
There are a few different tips that can be useful when using tow haul mode on a vehicle. First, it is important to understand what tow haul mode actually is and how it can be beneficial. Tow haul mode is basically a setting on a vehicle that is designed for towing or hauling. This mode can be engaged by a switch on the dash and is typically used when a vehicle is being used to tow a heavy load. When tow haul mode is engaged, the transmission shifts differently in order to provide more power and torque to the engine. This can be helpful in a number of situations, such as when towing a heavy trailer up a steep hill.
Another tip for using tow haul mode is to make sure that the vehicle is properly equipped for towing. This means that the vehicle should have a proper hitch and wiring harness installed. The hitch should be rated for the weight of the trailer being towed, and the wiring harness should be able to handle the electrical load of the trailer’s lights and brakes. If the vehicle is not properly equipped for towing, engaging tow haul mode is not going to be very helpful.
Finally, it is important to drive safely when using tow haul mode. This means paying attention to the road and conditions ahead, and being aware of the extra weight that the vehicle is carrying. It is also important to use the proper gear when going up or down hills, and to avoid sudden stops or starts. When used properly, tow haul mode can be a great help when towing a heavy load.
How do I know if tow haul mode is working?
The simplest way to tell if tow haul mode is working is to look at the transmission temperature gauge. If the transmission is running cooler than normal, then tow haul mode is likely engaged. However, transmission temperatures can vary for a number of reasons, so this isn’t a foolproof method.
Another way to tell if tow haul mode is engaged is to listen for a change in engine noise. In tow haul mode, the engine is typically louder as it works harder to maintain speed.
Of course, the best way to tell if tow haul mode is working is to feel the difference in performance. With tow haul mode engaged, the transmission should shift more quickly and firmly, and the engine should have more power. If you don’t feel a difference, then tow haul mode may not be engaged or it may not be working properly.
What is Tow-Haul mode in a car?
Tow-haul mode is a feature of some car transmissions that helps reduce shift cycle and improve control when the vehicle is hauling heavy loads. This mode adjusts the transmission’s shift pattern to help keep the engine in its Midrange and Quietest ranges.
What does the tow haul button do on an SUV?
On an SUV, the tow haul button engages or disengages tow-haul mode. When the tow haul mode is engaged, it will assist your vehicle pull or tow large loads or heavier trailers safely.
How does the Haul mode work on a truck?
The Haul mode on a truck works by overriding the normal brakes and transmission, allowing the truck to move at a much slower pace. This is particularly helpful when towing a container, as it prevents the trailer from being pulled away too quickly and damaging either the truck or the container. Additionally, this mode allows the truck to cruise in a straight line — perfect for navigating tricky lanes or roads.
What does Tow Haul mode do on a Ford Ranger?
When in Tow Haul mode, the transmission will downshift to second gear and reduce power to the engine. This will provide more traction for the vehicle and trailer when stopping or moving slowly.
What is the difference between tow mode and Tow Haul mode?
The main difference between the tow mode and Tow Haul mode is that the tow mode makes the vehicle operate in low gear, allowing the engine of your vehicle to stop and utilize the brakes slowly.
What does the tow-haul button do on a car?
The tow-haul button initiates the vehicle tow-haul mode, which is necessary to lower the gear of your vehicle and might shift too early and provide you with additional torque. Most of the transmissions are smart enough these days, and they have various functions whenever this feature initiates.
What is Tow/Haul mode and how do I use it?
When in Tow/Haul mode, the system will maintain lower gears longer when accelerating or decelerating. You will notice it even more on mountain roads. Tow/Haul mode also gives you better engine response and adds engine braking to help reduce vehicle speed. To turn it off, simply press the trailer tow button again.
What does the tow button do on a Chevy Silverado?
The tow button on a Chevy Silverado will allow you to use the braking system to slow down, in addition to the use of the brakes.
How do you use the tow button on a Ford truck?
To use the tow/haul button on a Ford truck, first find it on the dashboard close to the shift levers. It is generally within reach of the driver. Once you have located the tow/haul button, push it in towards the center console to activate it. Then use your hands to move the shifter into «H» or «L» position. Next, release the tow/haul button and pull on the shift lever until you reach «P» or «R» gear. Finally, push the tow/haul button back towards the center console and insert your key into the ignition.
What is Tow/Haul mode on a truck?
Tow/Haul mode is a special transmission shift pattern that’s used on trucks to help you tow heavier objects safely. When you’re in tow/haul mode, the truck changes its shift patterns so that it can move itself and the trailer faster. This helps to avoid accidents and keep both you and the trailer safe.
What should you consider when hauling a heavy load?
There are many things you need to consider when hauling a heavy load. Primary among these is the weight of the item being hauled and how much power your truck has. Other factors to consider include: -Your truck’s tow/haul mode. Some trucks have special modes that help increase their power when towing a trailer. -The size and weight of the trailer. Make sure the trailer is large enough to fit the power and handling of your truck. -The terrain. Heavy objects can cause damage if they’re dragged over obstacles or downhill. Be aware of any potential hazards before moving your trailer.
What does tow haul mode do?
If you are driving a large SUV or pickup truck, you might have noticed a tiny button with the “tow-haul” designation. While drivers often put such drive assist systems to the side, this option could truly make a difference in your driving experience, especially while towing something.
So, what does tow haul mode do in cars that have this option? The tow haul mode practically changes the pattern of your gear shift cycles and keeps the car in the RPM range where peak power is accessible. If you want to see how handy this mode truly gets, this guide will make a perfect intro to it.
Tow haul mode basics and how it works
The tow-haul mode is only available on SUVs, trucks, and pickups that come with an automatic transmission. It helps generate enough power which helps cope with heavy loads that you might attach and tow.
Your car can’t know when you are putting that extra weight to tow it, so it comes in handy to tell it yourself by pressing the button. The biggest misconception is that this mode increases the towing capacity of your vehicle since it doesn’t. The load capacity is determined by the manufacturer, and there’s nothing you can do to change it.
However, you can make it easier for the vehicle’s engine and transmission to take the load slightly better with the tow-haul mode. You can easily see what it does by pressing it while looking at your RPM gauge. As soon as you hit that button, the engine will jump to higher revs.
Think of it this way – if you are just cruising in your truck while towing a heavy load at the back, all that extra weight pressures the transmission. The throttle response is also lowered by the weight, so it might seem like your vehicle struggles to keep up with the weight. The additional pressure negatively affects both your transmission and the engine.
Benefits of tow haul mode for your vehicle
The tow haul mode comes with several crucial benefits that not only relieve the pressure off from your transmission but also save the engine and the brakes. Here are some of the main benefits of the tow haul mode:
- Keeps the RPM in the optimal range to preserve the transmission
- Gives you a sort of engine braking to make the brakes last longer
- Ensures that the engine performance is compatible with the weight
Although modern-day trucks and SUVs come with engines that have enough power for towing, the benefits of this mode are unprecedented. It can also be used to boost the overall performance even while you are not towing anything.
Still, it’s mostly advisable to use it as you are carrying extra weight or going down a steep hill. It prevents “riding the brakes” and therefore prolongs their life span.
How does this mode help preserve your transmission?
Perhaps the most important aspect of the tow-haul mode is its rejuvenating effect on the transmission. Well, at least it will save you from excessive wear and tear that frequently happens as you drive with a bit of extra weight.
You can imagine how this reflects your transmission by towing some weight without the tow-haul mode active. In this case, you’ll probably achieve a certain speed level and cruise with the weight attached. However, once there comes a time you need to take a turn or two, or even climb up the hill, the pressure on your transmission gets tremendous.
It doesn’t help that most drivers simply floor the throttle to tackle the situation. Sudden acceleration will make your engine struggle to speed up due to the weight. The transmission will shift gears regularly, which wouldn’t hurt the engine or the transmission without the weight.
However, since you’ll be having some extra weight attached, you’ll be “suffocating” the engine and the transmission. Frequent shifts will just result in faster wear and tear, while the tow-haul mode makes the up-shifts occur at a much higher RPM range. Because of this, the engine will have enough power to take on the hills and turns, while the transmission will only conduct the necessary gear shifts.
Engine braking effect
Another useful aspect of the tow-haul mode is the sense of “engine braking” that you get with this mode. If you are driving an automatic car, you are probably not aware of the term as much as drivers of manual cars are. This allows you to slow down even without using your brakes by downshifting and letting go of the gas.
While the revs will jump at first, if you don’t push the throttle, your car will slow down as the revs consolidate. Even if the brakes completely fail on manual cars, you can downshift to slow down using engine braking until you eventually stop.
That’s what the tow-haul mode lets you do with modern automatic trucks as well. The RPM range will take downshifts earlier than regularly, similarly to driving a manual car. So, you can take down steep hills even without riding the brake. This will let your brake pads last longer, and it won’t damage your transmission regardless of what many drivers think.
Engine performance coordinates with the weight
As mentioned, the extra towing weight you put on your car also requires a different engine performance. Especially if you are driving a naturally-aspirated V6 or V8 engine, keeping the RPMs low just to kick down the pedal won’t do any good for your engine.
The tow-haul function keeps your revs in that sweet spot where the power is easily accessible as soon as you hit the throttle. You can see this by pressing the button while cruising with weight – the RPM range will jump to around 3000 revolutions per minute.
So, the engine will perform the same as it would on lower revs but without the additional weight.
If you’ve been wondering “what does tow haul mode do” now you know the basics behind it. It simply helps adjust the transmission and engine’s performance to the added weight, so these systems don’t wear and tear.
You can also use it to enjoy a bit more aggressive ride if you are driving a powerful V8 machine, but it’s primarily used for towing situations.
Does the tow haul mode give more power?
The tow haul mode doesn’t give you more power, it simply keeps the RPM range higher so you can handle the towing weight more adequately.
Does tow haul mode save gas?
No, the tow haul mode doesn’t save gas and it even makes your engine use more fuel due to the higher RPM range. That’s why it’s advisable to only use this mode while driving with additional weight.
Does tow haul mode increase the towing capacity?
Tow haul mode doesn’t increase the towing capacity of your truck as it simply relieves the engine and the transmission by less frequent gear changes and a higher RPM range.
When to use tow haul mode on the Silverado?
You should use the tow haul mode on the Silverado if you need a bit of additional engine power to carry the weight, or if you are driving down a steep hill.
Filip is a lifelong automotive enthusiast dedicated to research about performance parts, tires and suspension.